About O-Sulee Spring Cushion

Tired of replacing your shock absorber? Worry no more! O-sulee Spring Cushion, a revolutionized product from Taiwan, is here to help us prolong the life span of our shock absorbers of your vehicle.

O-sulee Spring Cushion (with patent no. M343597) is made up of thermoplastic elastomer (rubber) which exhibits superiority in mechanical and terminal properties in a wide range of conditions. And what makes elastomer special is that it can be stretched to many times their original length, and can bounce back into its original shape without permanent deformation.

The O-Sulee Spring Cushion is made up of 54 degrees of hardness, which results to its resistance to cracking and oxidation. So how can O-sulee Spring Cushion help your vehicles? O-sulee Spring Cushion works in our Shock absorbers as a support and brace to the spring, which provides resistance to movements that dampers spring oscillation.

By installing O-sulee Spring Cushion in your vehicle, you can be assured that your absorber will last long. It is safe, efficient and easy to use compared to other products. All you need to do is to clip the O-sulee Spring Cushion on every spring of your shock absorbers, using water and soap only. And after installation, you’ll be surprised on how the product really works on your shocks!

O-sulee Spring Cushion helps reduce the damaged of your shock absorbers and smoothens the bumpy ride of your vehicle. And it doesn’t stop there. It also protects the spring and the shock absorber from early rupture and aging due to traveling on rough and uneven surfaces. This occurs when the vehicle is traveling on rough and winding roads, Shock absorbers spring at this time is pulled up to its maximum, and when you’re back traveling on smooth surface, the shock absorber will eventually turn down. Hence, the incident may even lead to hydraulic control oil spills and damage the shock absorber rubber gasket. The good news is O-sulee Spring Cushion helps avoid that incident. When the spring is moved up, the spring cushion will take away the momentum from the spring, thus lessen its impact.

And lastly, O-sulee Spring Cushion handles the spring under pressure. This happens when you are suddenly forced to step on the brake of your vehicle while driving. The front shock absorber spring is squeezed down, and all the weight of your vehicle is pushed forward. The faster the speed of your vehicle, the longer the distance it will travel before it stops. But with O-sulee Spring Cushion installed in your vehicle, it minimizes the distance traveled by your vehicle when you suddenly step on the brakes, and reduces the offset center of gravity which results to the tail flicking of the vehicle that may result to accident.

Intallation Guide

Tested and recommended by
several member of :




1. Use the measurement tool and measure the sizes of the spring in between 2nd 3rd layer of the coil spring. Lift the car with lifter and clean the spring steel bars using soapy water. (Do not used oil based lubricants.) Upon Installation, apply the soapy water to the spring and spring cushion.

2. Push the upper portion of the spring cushion to the upper layer of the coil spring then push downward.

3. Each spring cushion should be in between the 2nd and 3rd layer of the coil spring. After installation, road test the vehicle and check whether the spring cushion had been fully attached.